Multifunctional floor care product for manual and machine floor cleaning and care.

When used regularly, develops an EASY-TO-CLEAN "film"

• Re-soiling of floor surfaces is significantly reduced
• Fast dirt removal
• Simple, fast cleaning

For universal use

• For all water-resistant floor coverings
• Suitable for spray cleaning

Highly concentrated

• Lower storage requirements
• Costs are saved

Fresh aroma

Bottle can be refilled multiple times

Simple dosing via dosing cap

Colour: green, (adjusted to recognised colour-coded system) u2013 green = floor

Intensive active cleaning and care substances ensure effective cleaning

Non-slip effect, no layer build-up due to water-soluble polymer base

Notice

With self-shining, polished stone floors, we recommend EASY-TO-CLEAN surface cleaner, art. no. 0893117105

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

PVC, linoleum, rubber/elastomers, matt natural stone (granite, marble etc.), matt synthetic stone (tiles, concrete)

Suitable for machine and manual floor cleaning.

Instructions

Dosage:

• Machine application: 15 ml in 10 litres of water
• Manual application: 30 ml in 8 litres of water
• Spray properties: 15 ml to 0.5 l of water

With heaving soiling, the dosage can be increased accordingly.

To enhance the shine, floors can be polished with single-disc or high-speed machines.

Suitable glove:

Nitrile chemical protective glove

Permeation level: 2

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 3

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.