For easy adhering of glass and metal to and with each other.

Impact and vibration-resistant adhesion

Permanent adhesion between glass and metal

Excellent chemical resistance

Highly resistant to dilute acids and bases, water, and alcohol

Notice

Not to be exposed to direct sunlight or used on significantly heated glass surfaces. Surfaces to be adhered must be level. Special adhesive does not have any gap-bridging properties

Not suitable for furniture construction.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Inner rear-view mirrors in vehicles, metal bolts, hinges on exhibition side windows etc.

Instructions

• 1. Thoroughly clean surfaces to be adhered with acetone cleaner and dry the surfaces. Then apply activator to the base surface
• 2. Apply the adhesive to the metallic surface
• 3. Press the metallic surface onto the glass surface for approx. 20 seconds. Bonding has up to 50% of its load capacity after just 15 to 20 minutes

Suitable glove:

Nitrile chemical protective glove

Permeation level: 2

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 3

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.