Acidic sanitary maintenance cleaner with beading effect

When used regularly, develops an EASY-TO-CLEAN "film"

• Re-soiling of ceramic and fixture surfaces is greatly reduced
• Fast dirt removal
• Easy and quick cleaning of objects
• Water simply beads and runs off

Highly concentrated

• Suitable both for basic cleaning and for daily maintenance cleaning depending on amount used
• Lower storage requirements
• Cost savings

Thorough cleanliness achieved with each cleaning process

• Deodorising

Fresh aroma

pH 1 in concentrated form

Bottle can be refilled multiple times.

Simple dispensing with Top Dos dosing cap.

Notice

Then rinse thoroughly with water. Not suitable for marble and other acid-sensitive materials, e.g. travertine, aluminium, painted surfaces and acrylic glass.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Quickly and powerfully removes lime deposits, soap residues, urine scale and greasy stains from acid-resistant materials

• Smooth/grained plastic surfaces
• Washbasins/fittings
• Showers and baths
• WC/urinals
• Wall and floor tiles

Suitable for manually cleaning surfaces and floors.

Instructions

Manual application: 30 ml in 8 litres of water

Spray properties: 15 ml in 0.5 litres of water

Higher doses can be used as required for more intense dirt!

Suitable glove:

Neoprene chemical protective glove

Permeation level: 4

Heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.