Special cleaning fluid for pre-cleaning metal surfaces. NSF-certified.

Powerful removal of oil and grease

• Dirt such as drilling and cutting oils, dust and other machining residue is thoroughly removed
• Optimum preparation for further renovation, cleaning and care
• Economical

Tested for use in food-contact areas

Safe to use in food-processing operations such as industrial kitchens, canteens, slaughterhouses, food transport facilities etc.

Contains no phosphates, organic solvents or caustic substances

• Reduces the potential risks associated with daily use
• Reduces environmental pollution
• Complies with local waste water ordinances
• Non-hazardous in line with the Gefahrstoffverordnung (German ordinance on hazardous substances)

Gentle on materials

Does not attack paint, rubber, plastics or seals.

Biodegradable > 95%

Notice

Avoid direct contact with food.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

For surfaces made from stainless steel, chrome, brass, anodised and enamelled metal surfaces as well as light-alloy and non-ferrous metals on vehicles, in boat construction, on technical equipment, in the home and in food processing companies.

Instructions

Spray the dirty surface, let it take effect briefly and clean thoroughly with a cloth. Aid the cleaning process with a sponge or soft brush where necessary.

Suitable glove:

Nitrile chemical protective glove

Permeation level: 2

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 3

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.