08930256 | Wurth.am

0x - +	Please log in to see the price	Add to cart

Specification

Special desiccant for use in car washes with air blowers

Enables ultra-quick breaking of the water film

Water is largely removed from the vehicle surface before the air blower is used
Excellent drying

Creates a long-lasting protective film

Vehicle develops a radiant shine
Rainwater drips off

Free of phosphate and AOX

pH-value in the concentrate: approx. 4.5

Free of mineral oil and hydrocarbons

Easily biodegradable in accordance with OECD

OECD = Organisation for Economic Co-operation and Development

Does not compromise the effectiveness of light fluid separators

Notice

Store in a frost-free place! Avoid overdosing. Only use on cleaned and rinsed surfaces

The above application instructions are recommendations given on the basis of our own tests and experience. We recommend that you carry out your own tests before use. Due to the great variety of different applications and storage and processing conditions, we cannot guarantee a particular application result. We will not accept legal liability for any advice or technical information provided by our free customer hotline unless this advisory service and/or technical information is part of the contractually agreed performance owed by us, or the customer service employee acted willfully or intentionally. We guarantee the consistent quality of our products and reserve the right to make technical changes and improvements.

Application

Instructions

When dispensing using the dispensing pump, draw in undiluted. Application concentration: 0.1%

Technical information

Weight of content	25.61 kg
Chemical basis	Cationic surfactants
Smell/fragrance	Characteristic
Colour	Light brown
pH value	4.5
Conditions to maintain shelf life from production	frost-free storage area
Conditions for pH value	in concentrate
Density	0.976 g/cmu00b3
Density conditions	at 20u00b0C
Shelf life from production	12 Month
Silicone-free	Yes
Phosphate-free	Yes
Bio-degradable	Yes
AOX-free	Yes
Contents	25 l
Container	Canister

Suitable glove:

Nitrile chemical protective glove

Permeation level: 3

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 4

Long, heavy-duty design

Butyl chemical protective glove

Permeation level: 6

Gas-tight and resistant to exhaust gases produced by combustion processes

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time	Permeation level
< 10 min	0
u2265 10 min	1
u2265 30 min	2
u2265 60 min	3
u2265 120 min	4
u2265 240 min	5
u2265 480 min	6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Product information