089002350 | Wurth.am

0x - +	Please log in to see the price	Add to cart

Specification

Rapid, high-modulus 1-component window adhesive for application without primer.

Short drive-away time

The vehicle is ready to use again after one hour

High-modulus

Vehicle-strengthening window adhesive that is also highly elastic thanks to new UHM technology (ultra-high modulus)

Antenna-compatible, non-conducting

Prevents contact corrosion

Suitable for use on aluminium, magnesium and hybrid vehicle bodies (e.g. Audi A8, Jaguar XJ etc.)

Safety-tested

Drive-away time confirmed with crash test and Tu00dcV certificate in accordance with FMVSS 208/212
Meets requirements of original equipment manufacturers (vehicle manufacturers)

Notice

Completely clean the interior side of the new window with Wu00fcrth active cleaner and then wipe it dry! Apply a thin layer of Wu00fcrth Contact Clean using a clean, lint-free cloth in one swipe, and leave for 15 min. If the vehicle flange was damaged when trimming the remaining adhesive bead (bare metal), two coats of Wu00fcrth Varioprimer must be applied to prevent corrosion, while taking the specified flash-off time into account. The products must be checked to ensure that they have not expired before they are used. Apply the adhesive while guiding the gun vertically, starting from the centre at the bottom of the window. Do not position the vehicle on the lifting platform. Observe the information regarding bead geometry provided by the vehicle manufacturer. The application and drive-away times must be observed.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

When applying the material, ensure that the working environment is clean. It is essential to use the product with the accompanying Wu00fcrth system components to ensure correct and faultless work. The work instructions provided with the product must be followed during application.

Technical information

Contents	310 ml
Container	Cartridge
Chemical basis	Moisture curing 1K polyurethane
Colour	Black
Drive-away time (with airbag)	1 h
Drive-away time (without airbag)	30 min
Drive-away time conditions	at 23u00b0C and 50% relative humidity
Max. open time /conditions	10 min / at 23u00b0C and 50% humidity
Min./max. processing temperature	5 to 35 u00b0C
Min./max. temperature resistance	-40 to 140 u00b0C
Shelf life from production/conditions	9 Month / at 5u00b0C to 25u00b0C

Suitable glove:

Nitrile chemical protective glove

Permeation level: 2

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 3

Long, heavy-duty design

Latex and neoprene chemical protective glove

Permeation level: 1

Cotton flocking on the inside

Household glove

Permeation level: 1

Liquid-proof, premium-quality cleaning glove made from natural latex

Natural latex and neoprene chemical protective glove

Permeation level: 1

Cotton flocking on the inside

Butyl chemical protective glove

Permeation level: 2

Gas-tight and resistant to exhaust gases produced by combustion processes

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time	Permeation level
< 10 min	0
u2265 10 min	1
u2265 30 min	2
u2265 60 min	3
u2265 120 min	4
u2265 240 min	5
u2265 480 min	6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Product information