Միայն բիզնես հաճախորդների համար
ՀԱՃԱԽՈՐԴՆԵՐԻ ՄՈՒՏՔ
Ցանկանու՞մ եք լինել առցանց հաճախորդ
Գրանցվեք հիմա և օգտվեք մեր առցանց խանութի բոլոր հնարավորություններից։
Ապրանքներ
Միայն բիզնես հաճախորդների համար
Թեժ գիծ +374(0)10 349347, 349348
Արագ առաքում
Ավելի քան 125,000 Ապրանք
Նմանատիպ ապրանքներ
xՀղկող բարձիկ
Արտիկուլ: 0585026090
Հարցերի դեպքում կարող եք զանգահարել՝ +374(0)10 349347, 349348
0x |
Գինը գրանցվելուց հետո
|
Ավելացնել զամբյուղ |
Կատալոգի էջը PDF ֆորմատով 1
Maximised effect with minimised wear
Grooving (spiderweb structure) of surface greatly increases surface area. This allows much more polish to be absorbed, delivering greater removal rate and extending the performance of the abrasive polishing grains.
Open-pored foam for consistent removal rate and maximum duration of use.
The polishing pads are made from high-quality open-pore foam. The open pore structure and grooved surface allow heat produced during polishing to be ideally dissipated.
Greater flexibility over any body shape
Thanks to rounded edges, the polishing pads adapt to any shape or curvature of vehicle and prevent new paint irritation owing to the intelligent geometry.
Harmonious polishing results
The 145-mm and 170-mm diameters provide a drill hole for fast, convenient and perfect centring.
User friendly
Polishing pads easily removed from riptape plate due to edge bevel at the edge of the riptape.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.
ՎԵՐՋԻՆ ԴԻՏԱԾՆԵՐԸ