Asphalt screw anchor W-SA A-IG 0901716102

0x - +	Գինը գրանցվելուց հետո	Ավելացնել զամբյուղ

Specification

For use with WIT-PE 500 chemical injection mortar

Quick, easy removal (female thread)
Reducers also allow use of smaller metric screws or threaded elements
The anchor can be removed at any time by unscrewing the metric screw
Anchorage via bond between WIT-PE 500 chemical injection mortar, asphalt and asphalt screw anchor, and positive locking between asphalt and asphalt screw anchor
WIT-PE 500 chemical injection mortar: Pure epoxy mortar
Do not apply below +5u00b0C
Minimum shelf life: 12 months
Storage temperature between +5u00b0C and +25u00b0C

Notice

Always wear safety glasses and gloves when using WIT-PE 500 chemical injection mortar. Drill cuttings must be removed from the drill hole. The asphalt screw anchor is unsuitable for constant tensile loads.

Application

W-SA A-IG can be used for anchoring in asphalt.
The anchor may only be loaded with a constant pressure load, a short-term transverse load and a short-term tensile load.
Suitable for attaching bicycle stands, shopping trolley bays, park benches, fences, barriers, signs, notice boards, waste bins, construction site fencing, construction site safety barriers etc.

Technical information

Anchor diameter	10 mm
Anchor length (l)	100 mm
Drill hole diameter	16 mm
Drill hole depth (h 1)	110 mm
Embedding depth (h nom)	100 mm
Required screw length - condition	15 mm + thickness of the add-on part
Min. asphalt thickness	120 mm