Commercial vehicle high-performance lubricating grease 08938804

0x - +	Գինը գրանցվելուց հետո	Ավելացնել զամբյուղ

Specification

Lithium complex, partly synthetic oil-based lubricating grease

Conforms to the Volvo Standard 1277.2 and NLGI Standard GC-LB specifications

Complies with leading vehicle manufacturer specifications for optimum quality.

Broad range of applications

One lubricating grease for the majority of lubricating points, thereby ensuring simple stock keeping and optimum application reliability.

Extremely high pressure absorption capacity

Good corrosion protection

Water-repellent

Silicone-free, acid-free and resin-free

Notice

Not suitable for lubricating points on which lubricating greases containing solid lubricants are specified, such as track rod joints. We recommend using multi-purpose grease II, art. no. 08938711, for this purpose.

The operating instructions of the major assembly and commercial vehicle manufacturers must be observed! For further information, refer to the technical data sheet. Store upright in a cool, dry place!

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

For lubricating points subject to medium and heavy loads on commercial vehicles, such as wheel bearings (axle boxes), cardan shaft bearings, final drives, trailer couplings, liftgates, wheel hubs, cardan joints, axle legs, wheel suspension, lifting equipment, handbrake connecting rods, dump truck suspension, semi-trailers etc.

Instructions

Clean and degrease the parts to be lubricated. Then apply the grease in the required coating thickness.

Technical information

Chemical basis	Mineral oil
Soap base	Lithium complex
Lubricant code	KP2N-30
Colour	Yellow/brown
Smell/fragrance	Oil
Density	1 g/cmu00b3
Kinematic oil basis viscosity	210 mmu00b2/s
Conditions for viscosity of oil basis	at 40u00b0C
Min. dripping point	260 u00b0C
Dripping point conditions	in accordance with DIN ISO 2176
Min. temperature conditions	-30 u00b0C
Max. temperature conditions	140 u00b0C
Max. short-term temperature resistance	220 u00b0C
Min. worked penetration	265
Max. worked penetration	295
Worked penetration conditions	in accordance with DIN ISO 2137
NLGI grade	2
Conditions for NLGI grade	with DIN 51818
Corrosion protection period/category	Corrosion category 0
Corrosion protection period conditions	in accordance with DIN 51802
Behaviour in the presence of water	1-90
Conditions for behaviour in the presence of water	in accordance with DIN 51807-1
Resin-free	Yes
Silicone-free	Yes
Acid-free	Yes
AOX-free	Yes
Free from heavy metals	Yes
Weight of content	25 kg
Shelf life from production	72 Month

Suitable glove:

Nitrile chemical protective glove

Permeation level: 6

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 6

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time	Permeation level
< 10 min	0
u2265 10 min	1
u2265 30 min	2
u2265 60 min	3
u2265 120 min	4
u2265 240 min	5
u2265 480 min	6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Տեղեկություններ ապրանքի վերաբերյալ