Միայն բիզնես հաճախորդների համար
ՀԱՃԱԽՈՐԴՆԵՐԻ ՄՈՒՏՔ
Ցանկանու՞մ եք լինել առցանց հաճախորդ
Գրանցվեք հիմա և օգտվեք մեր առցանց խանութի բոլոր հնարավորություններից։
Ապրանքներ
Միայն բիզնես հաճախորդների համար
Թեժ գիծ +374(0)10 349347, 349348
Արագ առաքում
Ավելի քան 125,000 Ապրանք
Նմանատիպ ապրանքներ
xՍուպեր RTV սիլիկոնային սոսինձ և հերմետիկ
Արտիկուլ: 08933312
Հարցերի դեպքում կարող եք զանգահարել՝ +374(0)10 349347, 349348
0x |
Գինը գրանցվելուց հետո
|
Ավելացնել զամբյուղ |
Կատալոգի էջը PDF ֆորմատով 1
Excellent resistance to chemicals
Non-acidic hardening system
Sealant in compressed-air can
When sealing e.g. oil pans and gearboxes it is vital that no sealant gets into the interior. For this reason we recommend to apply the sealant on a joining part surface. Join both parts and then carefully press by hand and lightly slide against each other. Afterwards separate the parts again and then remove the sealant that has gone inside. Join the components again within a max. of 5 minutes and tighten firmly. Before commissioning, observe the hardening time (depending on the sealant thickness).
The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
ՎԵՐՋԻՆ ԴԻՏԱԾՆԵՐԸ