Only for business customers
Customer Log in
Register your account
Sign up to become an online customer and start using all the features of our online shop!
Products
Exclusively for business customers
Hotline +374 (0) 10 349347, 349348
Quick delivery
More than 125,000 products
Technical chemicals Adhesives Structural adhesives Adhesive for plastics
Plastic adhesive Replast Easy Fast
Plastic adhesive Replast Easy Fast
+374(0)10 349347, 349348
Tecnical Description
- Silicone-free: Yes
- Colour: Black
- Min. skin-formation time: 5 min
- Chemical basis: Two-component polyurethane
- Contents: 50 ml
- Min./max. processing temperature: 15 to 25 °C
- Processing time: 1.5 min
- Can be sanded after: 10 min
- Density: 1.225 g/cm³
- Min. initial strength: 10 min
- Min./max. temperature resistance: -30 to 100 °C
- Shore D hardness: 79
Contents
Chemical basis
Processing time
Code
Package / Quantity
Price (AMD)
Code: 08935003
Tecnical Description
- Contents 50 ml
- Chemical basis Two-component polyurethane
- Processing time 1.5 min
- Colour Black
- Can be sanded after 10 min
- Density 1.225 g/cm³
- Min. initial strength 10 min
- Min. skin-formation time 5 min
- Min./max. processing temperature 15 to 25 °C
- Min./max. temperature resistance -30 to 100 °C
- Shore D hardness 79
- Silicone-free Yes
An adhesive for virtually every type of plastic
- No need for inconvenient use of different types of adhesive
- Can be used for repairs and structural bonding
Special positive mixer
- Optimum mixing with minimum volumes
- Low adhesive loss (waste)
Quick to harden
Further work, such as sanding, is possible immediately after hardening
Excellent chemical resistance
Resistant to a wide range of liquids, such as petrol, many lubricating oils and ethyl acetate
Solvent-free
There may be adhesion problems in individual cases due to the coatings and release agents used in some cases in the plastic production process. Not suitable for PE (polyethylene), PP (polypropylene) or PTFE (polytetrafluor ethylene) plastics. Check material compatibility on an invisible area if necessary.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage/processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.
Related products
LAST VIEWED
© 2020 All rights reserved.