The small abrasives should be used with a contact angle of 10 to 15°.

The maximum permissible speeds may not be exceeded.

Work only with appropriate protective equipment, such as protective goggles, gloves, ear protectors etc.

Please observe application and safety instructions

For high-gloss polishing or buffing of all polishable materials in conjunction with a polishing paste.

Materials to be processed: Specially for stainless steel, steel and non-ferrous metals

Instructions

• The better the pre-sanding, the simpler and shorter the effort required for polishing. The fleece disc should be very fine or the compact fleece disc should be the last pre-sanding step or pre-sanding should be done with an abrasive cloth of grain 320 or 400.
• Apply polishing paste with machine running.
• Every work step should be crosswise or diagonal to the previous one.
• To avoid impairing the results, do not mix polishing pastes.
• Remove polishing residues on the surface with brake cleaner.
• Important: If the individual work steps are not carried out carefully, flaws in the surface become even more obvious during buffing.
• The application recommendations are of a general nature depending on how good the initial surface is or how high the requirements for the final surface are.
• Perform preliminary testing or conduct your own tests!

Technical information

Additional accessory:

Art.-no.: 058657801

Holder

HOLD-FLPDISC-50MM-6MM

For small abrasives

Art.-no.: 058657802

Holder

HOLD-FLPDISC-76MM-6MM

For small abrasives

Art.-no.: 058657803

Holder

HOLD-FLPDISC-76MM-M14

For small abrasives

Art.-no.: 067324 1

Polishing Paste

POLPAST-BROWN-F.067323

For Mini-Polishing Disc

Art.-no.: 067324 2

Polishing Paste

POLPAST-BLUE-POLDISC-MINI

For Mini-Polishing Disc