Synthetic high-performance grease with white solid lubricants

Safe to use with food

EP additives for high pressure resistance

Excellent dry-running properties

Good sealing effect and corrosion protection

Excellent resistance to dust, dirt and water

Resin-free, acid-free and silicone-free

Safety product

• Very easy to use and safe to handle
• Improves health and safety in the workplace
• No special labelling required

Notice

Greases are supplied in plastic cartridges. The plastic cartridges improve storage (they prevent the grease from oozing out at high temperature). Store cartridges upright in a cool, dry place! The operating instructions of the vehicle, machinery and assembly manufacturers must be observed.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

The grease meets the requirements of the NSF H1 specification and is primarily used as a high-performance multi-purpose grease in the food industry in which there is a risk of direct contact between the lubricant and foodstuffs.

It is ideal for lubricating roller and journal bearings, even under extreme conditions such as higher temperatures, high pressures, shock and impact loads, water etc.

Instructions

Clean the lubricating point thoroughly before filling for the first time. Apply a thin and even coat to the parts being lubricated. Observe the bearing manufacturer's specifications! Avoid mixing with other greases wherever possible. If used in areas in which food is processed or stored, only the minimum quantity technically necessary may be used.

Suitable glove:

Nitrile chemical protective glove

Permeation level: 6

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 6

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.