Removable spray adhesive for securing lightweight materials

Can be re-adhered multiple times

Can be re-adhered or corrected several times after release

No adhesive residues

Can be released with no residue

Colourless

Adhesive film is transparent and not visible

Additional surface spray head

Does not discolour

No ripple formation

No bleed-through of adhesive

Silicon-free

Notice

After use, turn the can on its head and spray until the valve is empty.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, this service is provided under the exclusion of any liability, unless the advice or information given falls within the scope of our specified, contractually agreed scope of services or the consultant was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and carry out further development.

For bonding templates, advertising posters, decorations at trade fairs, fixing layouts and technical drawings, model construction, re-sealing boxes.

For bonding paper, cardboard, cloth, films and polystyrene to metals, wood, glass, plastics etc.

Instructions

Spray adhesive is sprayed onto one side. Test the suitability of the adhesive beforehand. The flat nozzle, which is integrated into the cap, is suitable for larger surfaces. Long-term bonding is possible by applying a thick layer on both sides. Adhesive residues can be cleaned with Industry Cleaner.

Suitable glove:

Nitrile chemical protective glove

Permeation level: 5

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 6

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.