Only for business customers
Customer Log in
Register your account
Sign up to become an online customer and start using all the features of our online shop!
Products
Exclusively for business customers
Hotline +374 (0) 10 349347, 349348
Quick delivery
More than 125,000 products
Technical chemicals Adhesives Structural adhesives Spray adhesive
Postforming contact spray adhesive
Postforming contact spray adhesive
+374(0)10 349347, 349348
Tecnical Description
- Density: 0.95 g/cm³
- Shelf life from production: 15 Month
- Chemical basis: Styrene-butadiene rubber
- Colour: Transparent/yellowish (with thicker layer)
- Min./max. processing temperature: 15 to 25 °C
- Min./max. temperature resistance of the hardened material: -15 to 80 °C
- Min. pressing pressure: 7 N/mm²
- Min./max. flash-off time: 3-5 min
- Flash-off time conditions: at 20°C and 65% relative humidity depending on layer thickness
- Max. open time: 30 min
- Conditions to maintain shelf life from production: well-ventilated storage area, no exposure to sunlight, 10°C to 30°C
- Weight of content: 12.3 kg
- Container: Aerosol canister
- Resistance against: Aging, Heat, Water
- Dichloromethane-free: Yes
- Toluene-free: Yes
Chemical basis
Density
Min./max. processing temperature
Code
Package / Quantity
Price (AMD)
Code: 0893100015
Product information
Catalogue page as PDF 1
Tecnical Description
- Chemical basis Styrene-butadiene rubber
- Colour Transparent/yellowish (with thicker layer)
- Density 0.95 g/cm³
- Min./max. processing temperature 15 to 25 °C
- Min./max. temperature resistance of the hardened material -15 to 80 °C
- Min. pressing pressure 7 N/mm²
- Min./max. flash-off time 3-5 min
- Flash-off time conditions at 20°C and 65% relative humidity depending on layer thickness
- Max. open time 30 min
- Shelf life from production 15 Month
- Conditions to maintain shelf life from production well-ventilated storage area, no exposure to sunlight, 10°C to 30°C
- Weight of content 12.3 kg
- Container Aerosol canister
- Resistance against Aging, Heat, Water
- Dichloromethane-free Yes
- Toluene-free Yes
High adhesive force
Suitable for bonding high-grade and thick laminates.
Film-like adhesive application
- Especially suitable for the application of fine top coats (e.g. textiles, foams etc.)
- No telegraphing of the adhesive, hence ideal for thin or shiny components
Strong initial adhesion
- Bonded parts do not slip together
- Bonds with high reset forces must be fixed in a mould for at least 24 hours
- Bonded parts can be finished immediately after pressing
Broad adhesive range
Good material compatibility and hence versatile
Age-resistant, water-resistant and heat-resistant
- Permanent bond
- Does not detach even at high temperatures (up to +80u00b0C)
Dichloromethane-free and toluene-free
Store and use container in a well-ventilated location. Container is pressurised. Protect from sunlight and temperatures over +50u00b0C. Recommended storage temperature +10u00b0C to + 30u00b0C. Optimum application temperature is +15u00b0C. Disconnect hose only when de pressurised and drained and with the valve on the container closed. Observe the information in the operating instructions.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Related products
LAST VIEWED
© 2020 All rights reserved.