Slightly crepe paper adhesive tape for general masking tasks.

Heat resistant to +80°C

The tape is also suited for painting tasks that require oven drying.

Excellent adhesion on smooth and painted surfaces

• For masking all smooth surfaces found in the construction and automotive sectors
• The tape can be removed again immediately after painting, and leaves no residue.

Resistant to moisture and solvents

• Suitable for painting work involving all commercially available water-based and solvent-based varnish and paint systems
• Can also be used for wet sanding

Notice

To ensure residue-free removal, the tape must be removed immediately after the paint or varnish has dried.

The adhesive tape is not UV-resistant and is therefore not suitable for outdoor applications.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

General masking tasks in the vehicle and painting fields, e.g. on painted metal, glass, chrome parts, rubber.

Masking for painting work, securing masking paper.

Nitrile chemical protective glove

Permeation level: 6

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 6

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.