Special, non-slip fold masker for floor protection.

• Can be walked on
• Long-term fabric adhesive edge with thick natural rubber adhesive
• Highly water and solvent-resistant
• Can be removed within up to 3 weeks with no residue
• Also possible to mask slightly dirty or slightly textured surfaces

Notice

• Adhesive edge not suitable for use on coated glass (e. g. tinted glass/self-tinting glass).
• Plastic surfaces with softening agents and nitrocellulose varnishes and precious metals may lead to residues. In these cases a test application for 48 hours is recommended. Not suitable for porous and absorbent substrates, e. g. porous natural stone, marble, granite, concrete and wood (non-varnished). It may cause discolouration.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Covering for carpets, parquet, tiles etc.