0893135 | Wurth.am

0x - +	Please log in to see the price	Add to cart

Specification

The graffiti remover for smooth, non-absorbent outdoor surfaces. The problem solver for heavy graffiti covering large areas, particularly on painted surfaces.

Very high cleaning performance

Effectively removes varnish, paint and felt-tip graffiti
No repainting required

With special paint solvents

Problematic paint coats are penetrated and dissolved without damaging the surface.

Protects material and surface

Solvent-resistant surfaces are not attacked.

Wide application range

AOX-free

Silicone-free

Notice

Prior to application, always check material compatibility and colour fading first in an invisible area, by applying graffiti remover with a cloth.

No fau00e7ade cleaning (concrete/stone)

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Buses, trains, passenger cars, trucks, construction trailers, telephone boxes, display windows, signs, machines, rollers, panels etc.

Instructions

Spray Graffiti-EX evenly and let it take effect briefly. Then wipe off the loosened paint with a damp sponge or cloth, working in one direction. The soaking time depends on the type of graffiti soiling (surface, paint, multiple layers, age etc.). With stubborn graffiti, repeat the process and extend the soaking time as required. During the cleaning process, hard insect sponges and brushes can be used as mechanical aids. Thoroughly clean the surface with water following application.

Technical information

Contents	500 ml
Smell/fragrance	Fruity
Colour	Colourless
Chemical basis	2-methoxy-1-methylethyl acetate
Density	0.94 g/cmu00b3
Min. flashing point	45 u00b0C
Shelf life from production	24 Month
Bio-degradable	Yes
AOX-free	Yes
Silicone-free	Yes

Suitable glove:

Nitrile chemical protective glove

Permeation level: 1

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 2

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time	Permeation level
< 10 min	0
u2265 10 min	1
u2265 30 min	2
u2265 60 min	3
u2265 120 min	4
u2265 240 min	5
u2265 480 min	6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Product information