08931100 | Wurth.am

0x - +	Please log in to see the price	Add to cart

Specification

Highly adhesive lubricant resistant to temperatures and high pressure

Anti-seize aluminium/copper-based high-performance lubricant
Prevents freezing and seizing, galling, wear, corrosion, frictional corrosion
Resistant to water, weak acids and alkali solutions

Notice

Do not apply to painted surfaces.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Application

This mineral oil-based lubricant is resistant to high temperatures. It is suitable for lubricating the backs of disc brake pads (prevents squeaking noises), screw connections (exhaust manifold screws, spark plug threads etc.), bearings, pivot points, joints, sliding surfaces etc. It prevents solid seals from becoming baked on and is also suitable for contact protection on the nozzles of gas-shielded arc welding guns and on batteries and battery terminals.

Instructions

The surfaces to be treated must be thoroughly cleaned beforehand and dust and lubricant residues removed. Shake the spray can well before use. Spray evenly from a distance of 20u201330 cm. When using the tube or can, apply to the surface to be treated evenly using a spatula or brush.

Technical information

Chemical basis	Mineral oil
Smell/fragrance	Characteristic
Colour	Silver coloured
Density	0.83 g/cmu00b3
Min. temperature conditions	-80 u00b0C
Max. temperature conditions	1100 u00b0C
Min. flashing point	-30 u00b0C
Silicone-free	Yes
Acid-free	Yes
Resin-free	Yes
AOX-free	Yes
VOC concentration (CH)	459 g/l
Resistance against	Water Weak lyes Acid
Contents	300 ml
Container	Aerosol can
Shelf life from production	12 Month

Suitable glove:

Nitrile chemical protective glove

Permeation level: 5

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 6

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time	Permeation level
< 10 min	0
u2265 10 min	1
u2265 30 min	2
u2265 60 min	3
u2265 120 min	4
u2265 240 min	5
u2265 480 min	6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Product information