0893100011 | Wurth.am

0x - +	Please log in to see the price	Add to cart

Specification

Adhesive remover for cleaning the contact spray adhesive system.

Powerful cleaning and dissolving properties

Efficiently cleans hardened contact adhesive from the application system
Economical to use

Non-lubricating

No lubricant film remains on the surface after mechanical cleaning
Clean only with a dry, lint-free cloth, no water

Large container

Mobile and handy to use
Efficient material supply

Notice

Store and use container in a well-ventilated location. Container is pressurised. Protect from sunlight and temperatures over +50u00b0C. Recommended storage temperature: +10u00b0C to +30u00b0C. Shake the container well before use. Check material and paint compatibility before use. Always carry out preliminary tests in non-visible places. Hardened contact adhesives can be attacked if they come into contact with cleaner contact spray adhesive. If it comes into contact with paint, the application time is max. 2 hours. Do not disconnect hose from the container unless it is depressurised and emptied, and the container valve is closed. Observe the information in the operating instructions.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Application

For connecting to the contact spray adhesive application system. Adhesive remover specifically matched to cleaning the connection hose, basic application guns and postforming application gun.

Thanks to a special characteristic, the cleaner is ideally suited for removing hardened adhesive residue. The cleaner is highly pressurised when it flows through the application system and is especially effective for this reason.

Cleaner contact spray adhesive should be used to clean after two adhesive containers have been used. Ideal for use in workshops, craft trades and industry.

Instructions

Connect the application gun and connection hose to the cleaner. Then open the container valve slowly. Check the connections for leaks. Actuate the gun intermittently. After rinsing, close the container valve and release the remaining pressure via the application gun. While cleaning, catch the material that escapes and dispose of it in the correct manner. Should the spray angle be affected by hardened adhesive residue on the brass-coloured main nozzle, wipe it with a lint-free cloth and clean it thoroughly with the cleaner contact spray adhesive.

Technical information

Colour	Yellow to amber
Chemical basis	Organic cleaning substances
Shelf life from production	15 Month

Required accessory:

Art.-no.: 0891602003

Application gun Postforming

SPRGUN-CNTCTADH-POSTFORMING-L15XW18CM

High-quality metal gun for handling postforming contact spray adhesive

Art.-no.: 0891602013

Connection hose

TUB-SPRGUN-4M

For connecting postforming application guns to the large container

Suitable glove:

Nitrile chemical protective glove

Permeation level: 1

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 2

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time	Permeation level
< 10 min	0
u2265 10 min	1
u2265 30 min	2
u2265 60 min	3
u2265 120 min	4
u2265 240 min	5
u2265 480 min	6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Product information