Միայն բիզնես հաճախորդների համար
ՀԱՃԱԽՈՐԴՆԵՐԻ ՄՈՒՏՔ
Ցանկանու՞մ եք լինել առցանց հաճախորդ
Գրանցվեք հիմա և օգտվեք մեր առցանց խանութի բոլոր հնարավորություններից։
Ապրանքներ
Միայն բիզնես հաճախորդների համար
Թեժ գիծ +374(0)10 349347, 349348
Արագ առաքում
Ավելի քան 125,000 Ապրանք
Նմանատիպ ապրանքներ
xHammer drill bit Plus Quadro-L Vario
Արտիկուլ: 0648051610
Հարցերի դեպքում կարող եք զանգահարել՝ +374(0)10 349347, 349348
0x |
Գինը գրանցվելուց հետո
|
Ավելացնել զամբյուղ |
Significantly improved compatibility with reinforcements
The symmetrical 4 x 90u00b0 cutting edge geometry (up to u00d8 10 mm with solid carbide head) prevents the drill bit from hooking in or running off centre when striking e.g. reinforcements.
Noticeably quicker drilling
The advanced tip geometry and asymmetrically placed elevations on the cutting edges ensure improved traction.
Perfect drilling properties over the entire service life
Considerably improved drilling speed and dust removal while at the same time offering increased protection against breakage
Vario spiral conveyor with back that narrows at the front and widens at the rear, as well as sharper angle at the spiral end ensures reduced friction, high stability and maximum transmission of impact energy.
Optimum guidance in drilled hole
Drill bit with four cutting edges and four-spiral geometry to ensure that the bit is guided perfectly into the drilled hole.
Precise spot drilling
The special self-centring tip enables high-precision spot drilling.
Iron reinforcements may only be drilled through with permission from a structural engineer. With long drill bit lengths, pre-drill using a short drill bit of the same diameter.
ՎԵՐՋԻՆ ԴԻՏԱԾՆԵՐԸ