Կպչող քսայուղ HHS 2000® 08931061

0x - +	Գինը գրանցվելուց հետո	Ավելացնել զամբյուղ

Specification

Partly synthetic oil that is extremely resistant to high pressures

High pressure resistance

Extraordinarily tear-proof lubricating film with excellent noise and vibration dampening

Good creep properties

Excellent lubricating properties for small gaps
Reliable protection against corrosion

Adhesive

Centrifuge-resistance on turning and rotating parts.

Good material compatibility

Compatible with O-rings/X-rings and plastics. Neutral behaviour on painted substrates.

Resistant to splashed water, salt water, weak acids and alkalis

Silicone-free, resin-free and acid-free

Notice

Resistant to high pressure loads

The HHS 2000 lubricating film remains active and does not strip off despite the high pressure load and shearing motion of the base body. Reliably separates the counterpart-body from the base body and thus ensures optimum wear protection at higher pressure loads. This is only possible for dirt-free lubricating points, which is why we recommend thoroughly and carefully pre-cleaning with HHS Clean, art. no. 089310610, prior to application.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Suitable for universal lubrication and for high pressure loads, e.g. shifting, accelerator and clutch linkages, Bowden cables, pins, joints, hinges, reversing levers, lock strikers, drag link ends, sliding rails, chain wheels, toothed racks and open gearwheels

Instructions

Shake the can before use, spray the parts and let it take effect briefly. After use, spray the can upside down until it is empty.

Technical information

Chemical basis	Hydrocarbon
Oil basis	Synthetic mineral oil
Colour	Yellowish
Smell/fragrance	Oil
Density	0.878 g/cmu00b3
Density conditions	at 20u00b0C
Min. temperature conditions	-25 u00b0C
Max. temperature conditions	180 u00b0C
Max. short-term temperature resistance	200 u00b0C
Flashing point of active ingredient	300 u00b0C
Kinematic oil basis viscosity	1500 cSt
Silicone-free	Yes
Acid-free	Yes
Resin-free	Yes
AOX-free	Yes
Resistance against	Salt water Weak lyes Weak acids Splash
Contents	150 ml
Container	Can
Shelf life from production	24 Month

Suitable glove:

Nitrile chemical protective glove

Permeation level: 5

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 6

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time	Permeation level
< 10 min	0
u2265 10 min	1
u2265 30 min	2
u2265 60 min	3
u2265 120 min	4
u2265 240 min	5
u2265 480 min	6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Տեղեկություններ ապրանքի վերաբերյալ