Graffiti and chewing gum remover for upholstery and textiles

Excellent cleaning performance

Effectively removes varnish, paint and felt-tip graffiti

Protects materials and surfaces

Penetrates deep into the fabric and removes the problematic dye

Short drying times on account of low residual moisture

The fabric does not become saturated

Ideal for gentle removal of chewing gum from a variety of surfaces

Fabric fibres are not pulled out

AOX-free

Silicone-free

Notice

Prior to application, always check material compatibility and colour fading first in an invisible area, by applying graffiti remover with a cloth.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Graffiti removal:

Spray evenly and let it take effect briefly. Then wipe off the loosened paint with a damp sponge or cloth. Work from the outside inwards. The soaking time depends on the type of graffiti soiling (surface, paint, multiple coats, age etc.). With stubborn graffiti, repeat the process and extend the soaking time as required.

Chewing gum removal:

Spray on and leave it take effect for 2 - 3 minutes. Then remove the loosened, softened chewing gum with a brush.