Medium-abrasive high-gloss polish for efficient paint preparation
Specially matched powdered composition made from aluminium oxide
- Moderate surface removal rate and very high gloss level
- Effortlessly removes sanding grooves from a grain of P2000 upwards
Thick consistency
- Polish does not splash
- Economical
- Low dust formation
- No laborious re-cleaning of adjacent areas
Can be applied manually and by machine
For conventional and scratchproof paint types
Suitable for use on used and new paint surfaces
Silicone-free
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Medium-abrasive high-gloss polish for efficient paint preparation, traces of grinding and scratches on used paints, as well as for removing defective areas on hardened repair top coats.
Paintwork preparation:
Traces of grinding and scratches, refurbishment of used vehicles
Instructions
Shake well before use. Moisten the surfaces of the selected polishing disc evenly with the paste and apply a small amount to the surface to be polished. Position the polishing pad flat on the area and start the machine. Apply a certain pressure at 1500-2000 rpm, process the surface until grinding traces or paint imperfections have been removed. Work in sections! Remove residual polish with a microfibre cloth.
Required accessory:
Art.-no.: 0585135
Lambskin Premium
POLHOD-LMBWOL-PREMIUM-BLACK-D135MM
For economical removal of scratched, dull and partially ground paint areas.
Art.-no.: 0585195
Lambskin, white
POLHOD-LMBWOL-HOKLP-D195MM
For professional polishing work on heavily stressed and weathered paint surfaces.
Art.-no.: 0585235
Lambskin, white
POLHOD-LMBWOL-STANDARD-WHITE-D135MM
For professional polishing work on heavily stressed and weathered paint surfaces.
Art.-no.: 058523 80
Lambskin, white
POLHOD-LMBWOL-WHITE-D80MM
For professional polishing work on heavily stressed and weathered paint surfaces.
Art.-no.: 0899900131
Microactive cloth Professional
MICROCLTH-PROFI-BLUE-40X40CM
For streak and lint-free results; perfect for daily cleaning and vehicle conditioning.
Suitable glove:
Nitrile chemical protective glove
Permeation level: 6
Cotton velour lining
Nitrile chemical protective glove, heavy-duty
Permeation level: 6
Long, heavy-duty design
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
|
Permeation level
|
< 10 min
|
0
|
≥ 10 min
|
1
|
≥ 30 min
|
2
|
≥ 60 min
|
3
|
≥ 120 min
|
4
|
≥ 240 min
|
5
|
≥ 480 min
|
6
|
|
Important information:
The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.