08930252 | Wurth.am

0x - +	Please log in to see the price	Add to cart

Specification

Intensive, highly concentrated foam cleaner for foam pre-treatment and wash of vehicles in car washes.

Highly concentrated active foam

The dirt is actively loosened from the vehicle surface as the foam bubbles burst
Outstanding cleaning power

Combination of special ingredients supports the brush sliding properties

Vehicle surfaces are protected
Recontamination of the brushes is prevented
Service life of the brushes is extended

No streaking when using preservers and drying aids

Can be used together with these aids in machines with water recycling systems.

Free of phosphate, AOX and silicone

pH-Value in the concentrate: 7.0

Easily biodegradable in accordance with OECD*. Does not compromise the effectiveness of light fluid separators.

Notice

Do not allow to dry! Store in a frost-free place!

*OECD = Organisation for Economic Cooperation and Development

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Highly foaming brush wash for passenger cars and commercial vehicles in automatic car washes.

Instructions

Depending on the device type, use as concentrate or mix with up to 9 parts water. To meet requirements, the foam thickness can be adjusted using the air feed and cleaning dispenser.

Consumption per vehicle: approx. 12u201314 ml.

Technical information

Contents	25 l
Product weight (per item)	26800 g
Chemical basis	Anionic tenside
Smell/fragrance	Characteristic
Container	Canister
Colour	Yellow
pH value	7
Density/conditions	1,015 g/cmu00b3 / at 20u00b0C
Shelf life from production	24 Month
AOX-free	Yes
Silicone-free	Yes
Phosphate-free	Yes

Suitable glove:

Nitrile chemical protective glove

Permeation level: 3

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 4

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time	Permeation level
< 10 min	0
u2265 10 min	1
u2265 30 min	2
u2265 60 min	3
u2265 120 min	4
u2265 240 min	5
u2265 480 min	6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Product information