08930259 | Wurth.am

0x - +	Please log in to see the price	Add to cart

Specification

Alkaline cleaning agent for pre-treating and removing stubborn dirt

Effective pre-cleaner

Accelerates softening and removal of stubborn dirt such as insect residue, tar, tree resin, bird droppings
Improves washing results

Multifunctional application

Can be used for high-pressure cleaning/pre-cleaning and in pre-spray devices

Free of phosphate, AOX and silicone

pH value in the concentrate: approx. 13

Easily biodegradable in line with OECD*

Does not compromise the effectiveness of light fluid separators

* OECD = Organisation for Economic Co-operation and Development

Notice

Do not allow to dry, and do not use on galvanised surfaces
Perform preliminary testing on surfaces sensitive to alkaline, such as aluminium
Protect against frost

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Tailored to high-pressure cleaning/pre-washing in brush wash systems, high-pressure portal wash, high-pressure washing in self-service washing systems and to pre-spray devices

Instructions

Dispense undiluted in the brush washing system. Application concentration: approx. 0.5u20132%
In high-pressure devices/self-service washing systems: Stir 1 part pre-spray to 2 parts water
In pre-spray devices: Stir 1 part pre-spray to 49 parts water

Technical information

Contents	25 l
Product weight (per item)	29800 g
Chemical basis	Anionic tenside
Smell/fragrance	Characteristic
Container	Canister
Colour	Light brown
pH value	13
Density/conditions	1,066 g/cmu00b3 / at 20u00b0C
Shelf life from production	24 Month
AOX-free	Yes
Silicone-free	Yes
Phosphate-free	Yes

Suitable glove:

Nitrile chemical protective glove

Permeation level: 3

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 4

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time	Permeation level
< 10 min	0
u2265 10 min	1
u2265 30 min	2
u2265 60 min	3
u2265 120 min	4
u2265 240 min	5
u2265 480 min	6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Product information