0893511050 | Wurth.am

0x - +	Please log in to see the price	Add to cart

Specification

For sealing all metallic pipe couplings and fittings with conical/cylindrical threads in line with DIN 2999

Immediate leak tightness up to 5 bar

Securely tightened connections can be loaded immediately up to approx. 5 bar; after final hardening, up to the bursting pressure of the pipes

High media resistance

Neutral behaviour with most industrial liquids and gases

Solvent-free and silicone-free

No dripping of the sealant from the thread

Safe, fast assembly

Easy to remove

Resistant to chemicals and gases

Notice

Not suitable for screw connections containing copper (brass, bronze, red brass) that come into contact with water > 40u00b0C. Not permitted for gas connections in buildings in Germany. In accordance with TRGI u201986/96.
The thread must be cut in accordance with the standard. During and once the product has hardened, the connections may not be rotated against each other, i.e. readjustment is not permitted.
The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre and painted surfaces. We always recommend that you conduct your own tests
The initial strength, final strength and functional strength depend on the material

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Ideal for use in the automotive and commercial vehicle industry, metal and tool manufacturing, shipbuilding, machine and engine construction, electrical and electronics construction etc. Seals metallic pipe connections in line with ISO 7.1 (conical/cylindrical thread) up to R 3".

Instructions

The threads must be dry, dust-free and grease-free. To achieve a completely sealed and pressure-tight connection up to the burst pressure, it is essential that the threads are cut in accordance with the standard, completely coated with adhesive, tightened securely (>5 Nm) and can no longer be twisted!

Technical information

Chemical basis	Methacrylic acid ether
Colour	White
Density	1 g/cmu00b3
Smell/fragrance	Mild
Min./max. initial strength	10-20 min
Min./max. functional strength	1-3 h
Min./max. processing temperature	5 to 40 u00b0C
Min./max. temperature resistance	-55 to 150 u00b0C
Min./max. breakaway torque	4-8 Nm
Breakaway torque conditions	M10 mm
Min./max prevail torque	1-3 Nm
Conditions for prevail torque	M10
Min./max. compressive shearing strength	2-6 N/mmu00b2
Min. flashing point	90 u00b0C
Max. gap-filling ability	0.5 mm
Silicone-free	Yes
Weight of content	50 g
Contents	44 ml
Product weight (per item)	74 g
Shelf life from production	12 Month
Suitable for	Thread diameter max. M80 Thread diameter max. R 3 inch
Nominal diameter	80 mm

Suitable glove:

Nitrile chemical protective glove

Permeation level: 6

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 6

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time	Permeation level
< 10 min	0
u2265 10 min	1
u2265 30 min	2
u2265 60 min	3
u2265 120 min	4
u2265 240 min	5
u2265 480 min	6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Product information