Zinc spray 0893113113

0x - +	Գինը գրանցվելուց հետո	Ավելացնել զամբյուղ

Specification

Long-term protection and repair of metallic surfaces

Excellent corrosion protection

The metal is actively protected, even with minor damage
Over 100 hours of salt-spray resistance (DIN 50021 SS)

Excellent adhesive properties on bare metal

Excellent spot welding properties

Notice

Not suitable as adhesive base for PU, MS polymer and hybrid sealing compounds.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

For visual enhancement, repair and protection against corrosion of metallic surfaces.

Technical information

Contents	400 ml
Chemical basis	Alkyd resin
Colour	Zinc
Min. curing time	2 h
Fully hardening/curing conditions	At recommended dry layer thickness
Resistance in salt-spray test	100 h
Max. temperature resistance	200 u00b0C
Dust-drying time	20 min
Dry layer thickness (first back-and-forth motion)	50 u00b5m
Conditions for dust-drying time	at recommended dry layer thickness
Proportion of pure zinc	97 %
Coating thickness	70 u00b5m
Recoatable/Can be painted over	Conditional, preliminary testing required
Grip strength conditions	at recommended dry layer thickness
Substrates with good adhesion	Steel Galvanised steel
Spot weldable	Yes
Cross-cut test	MAN 0-1
Max. grip strength	20 min
Min. grip strength	15 min
Min./max. grip strength	15-20 min
Cross-cut test conditions	in accordance with DIN 53151
Conditions for resistance in salt-spray test	in accordance with DIN 50021
Shelf life from production	24 Month
Conditions to maintain shelf life from production	at 10u00b0C to 25u00b0C

Suitable glove:

Nitrile chemical protective glove

Permeation level: 1

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 2

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time	Permeation level
< 10 min	0
u2265 10 min	1
u2265 30 min	2
u2265 60 min	3
u2265 120 min	4
u2265 240 min	5
u2265 480 min	6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Տեղեկություններ ապրանքի վերաբերյալ