Brake fluid DOT 4, low viscosity 0892009460

0x - +	Գինը գրանցվելուց հետո	Ավելացնել զամբյուղ

Specification

For hydraulic brake systems. Prescribed for VW/Audi, BMW and Opel vehicles.

Meets and exceeds the specifications: SAE J 1703, 1704, FMVSS 116, DOT 3 and DOT 4

Brake fluids can be mixed with any other commercial product that satisfies the following test requirements: FMVSS 116, SAE J 1703, 1704 or ISO 4925.

Formulated on the basis of glycol ethers

Excellent corrosion protection compared to ferrous and non-ferrous metals
High degree of thermal stability
Good rubber compatibility

Outstanding lubricating properties

Suitable for use in the hydraulic power transmission of clutch systems.

Suitable for innovative brake systems (e.g. ESP)

Developed for and tailored to the technical requirements of vehicle manufacturers.

Guarantees faultless operation of the ESP system, even at low ambient temperatures

Increased driving safety.

Notice

Brake fluid is hygroscopic.

Change brake fluids according to the vehicle manufacturer instructions. Under no circumstance mix with automatic transmission fluids (ATF) or mineral oils. Avoid contact with painted surfaces, as brake fluids have a solvent effect on paints.

The tap must only be used to pour brake fluid. After use (and during storage), always seal the canister with the original lid. The taps do not ensure that the brake fluid is not enriched with humidity. Please alert your customers to the correct storage method. Observe the information provided by the vehicle manufacturer.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Prescribed for VW/Audi vehicles with ESP. Complies with VW standard VW 50114
Prescribed for BMW vehicles with DSC without precharger
Prescribed for various Opel vehicles

Technical information

Contents	60 l
Container	Barrel
Colour	Yellow/amber
Smell/fragrance	Characteristic
Chemical basis	Polyglycol ether
Shelf life from production	36 Month
Min. wet boiling point	175 u00b0C
Min. dry boiling point	265 u00b0C
Density	1.06 g/cmu00b3
Density conditions	at 20u00b0C
pH value	8

Additional accessory:

Art.-no.: 089130206

Tap

AY-TAP-CANI-METAL-METALBARREL-60LTR

Metal tap with 3/4 inch connection for 60-l metal drum

Suitable glove:

Nitrile chemical protective glove

Permeation level: 5

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 6

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time	Permeation level
< 10 min	0
u2265 10 min	1
u2265 30 min	2
u2265 60 min	3
u2265 120 min	4
u2265 240 min	5
u2265 480 min	6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Տեղեկություններ ապրանքի վերաբերյալ