0904040101 | Wurth.am

0x - +	Please log in to see the price	Add to cart

Specification

Galvanised steel. Individual attachment: Non-cracked concrete. Multiple attachment: Cracked and non-cracked concrete.

Small drill hole depth
High load-bearing capacities
Visual setting check and hand protection when installing with the marking/spreading tool
Mechanical setting tool makes installation quicker and easier
Immediate load-bearing capacity u2014 no waiting
Attached part can easily be removed at any time
W-ED/S has collar enabling anchor to be installed flush with the surface and preventing it slipping further into the drill hole (safer installation)
The attached part can be anchored with a fastening screw or a threaded rod
No installation torque required

Notice

Drive-in anchor W-ED/A4 see 13.2

Application

Individual attachment: Standard concrete C20/25 to C50/60 (non-cracked concrete)

Multiple attachment: Anchorage of non-load-bearing systems (cracked and non-cracked concrete)

Suitable for attaching threaded rods, metal structures, metal profiles, grilles, cable conduits, pipes, mounting rails etc.

Can be used in concrete

W-ED/S, W-ED/S-BND and W-ED M5 may only be used in dry indoor room conditions

Technical information

Anchor diameter	10 mm
Anchor length (L H)	30 mm
Min./max. required screw-in depth	10-12 mm
Drill hole depth (h 0)	30 mm
Nominal drill-bit diameter (d 0)	12 mm
Min. centre-to-centre distance (s min)	100 mm
Min. edge clearance (c min)	115 mm
Minimum component thickness (h min)	120 mm
Through-hole in the component to be connected (d f)	12 mm
Torque during anchoring (T inst)	15 Nm

Required accessory:

Art.-no.: 0904020101

For drive-in anchor, without visual setting check

Art.-no.: 0904022101

For drive-in anchor, with visual setting check