089260602 | Wurth.am

0x - +	Please log in to see the price	Add to cart

Specification

Polyester resin-based TIN-Metallic filler with aluminium pigmentation for vehicle construction and vehicle repairs

High-quality filler

High-quality filler and resin combinations for pore-free, closed filling of recesses and uneven surfaces
Low dust build-up during sanding

For specialist, high-quality requirements

Aluminium pigmentation ensures extremely high degree of strength on metallic substrates

Notice

Fillers are sensitive to drying quickly
Caution! u2013 Risk of cracking above 80u00b0C
Particular caution should be exercised when using infra-red radiators
Maximum permissible VOC content of VAKU 60: 250 g/l of product category 2(b). Max. VOC content in accordance with German Ordinance on Solvent-Based Paints and Lacquers (ChemVOC FarbV): 14 g/l

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Outstanding adhesion and stability

Ideal for use on vertical areas, e.g. in container construction, silo construction, vehicle construction, vehicle replacement parts etc.
Superb adhesion to iron, steel, aluminium, galvanised and hot-dip galvanised surfaces

Tin solder replacement filler

Can be used in accident repairs as a substitute for soft solder alloy

Automotive/cargo

In vehicle construction and vehicle repair work with outstanding adhesion to steel, aluminium, zinc and hot-dip galvanised surfaces. Ideally suited for use as tin substitute filler in replacement parts.

Metal:

In machine and steel construction for compensating blowholes and welding spots. Optimum adhesion to steel, aluminium, zinc and hot-galvanised surfaces

Instructions

The surface must be clean, dry and free from grease

Sand surfaces

Due to water sensitivity, polyester material should only be sanded when dry where possible

Dosing

2% hardener

Pot life

4-5 minutes at 20u00b0C

Drying time

20-30 minutes at 20u00b0C

Sandpaper

P80-280
Wet sand only once completely dry

Technical information

Contents	1282.1 ml
Smell/fragrance	Characteristic
Weight of content	1760 g
Conditions for VOC concentration	ChemVOCFarb
Chemical basis	Polyester resin
Colour	Anthracite, metallic
Hardener content	2 %
Density	1.404 g/cmu00b3
Max. working life	5 min
Min. working life	4 min
Conditions for working life	at 20u00b0C
Conditions for drying time	at 20u00b0C
Min. drying time	20 min
Max. drying time	30 min
Max. temperature resistance of the hardened material	80 u00b0C
Max. permissible VOC concentration	250 g/l
Max. VOC concentration	14 g/l
Shelf life from production	12 Month

Suitable glove:

Natural latex and neoprene chemical protective glove

Permeation level: 1

Cotton flocking on the inside

Butyl chemical protective glove

Permeation level: 3

Gas-tight and resistant to exhaust gases produced by combustion processes

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time	Permeation level
< 10 min	0
u2265 10 min	1
u2265 30 min	2
u2265 60 min	3
u2265 120 min	4
u2265 240 min	5
u2265 480 min	6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Product information