Engine cleaner Engine wash 089301305

0x - +	Գինը գրանցվելուց հետո	Ավելացնել զամբյուղ

Specification

Powerful engine cleaner for engines, engine compartments and gearboxes

Good cleaning performance

Quickly and thoroughly removes oil, grease and other dirt
The cleaner adheres to vertical surfaces due to its viscosity, penetrates the dirt and loosens it to optimal effect

Gentle on materials

Sensitive surfaces such as aluminium, tin and zinc as well as painted surfaces, plastics and rubber are not attacked due to the lack of aggressive substances.

Fast separation in accordance with the Austrian standard test B 5105

Oily/greasy dirt is not emulsified, but is penetrated and separated. The resulting wastewater can therefore be separated via the light-oil separator.

Does not contain AOX compounds or organic solvents

No phosphates or complex compounds

Silicone-free

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Spray the undiluted engine wash onto the engine, engine compartment and gearbox. Rinse off thoroughly with a high-pressure cleaner after a brief soaking time. Can also be used in a high-pressure device. Can be used with cold and warm water. Mixing ratio 1:1 to 1:10

Technical information

Contents	5 l
Container	Canister
Smell/fragrance	Fresh
Colour	Blue
Chemical basis	Water and alkaline tenside
pH value	8.5
Shelf life from production	24 Month
Bio-degradable	Yes
AOX-free	Yes
Silicone-free	Yes
Solvent-free	Yes
Phosphate-free	Yes
Complex-free	Yes

Suitable glove:

Nitrile chemical protective glove

Permeation level: 3

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 3

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time	Permeation level
< 10 min	0
u2265 10 min	1
u2265 30 min	2
u2265 60 min	3
u2265 120 min	4
u2265 240 min	5
u2265 480 min	6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Տեղեկություններ ապրանքի վերաբերյալ