Window adhesive Classic Plus 0890023711

0x - +	Գինը գրանցվելուց հետո	Ավելացնել զամբյուղ

Specification

Elastic 1-component window adhesive with excellent stability

Standard module

For all popular vehicle types in passenger vehicle, commercial vehicle, bus, truck, agricultural and construction machine sectors

Antenna compatible, non-conductive

Prevents contact corrosion

Suitable for use on aluminium-magnesium bodywork (e.g. Audi A8, Jaguar XJ etc.)

Tested safety

Drive-away time confirmed with crash test and Tu00dcV certificate in accordance with FMVSS208/212!
Meets requirements of original equipment manufacturers (vehicle manufacturers)

Notice

It is imperative that the Wu00fcrth active cleaner and Wu00fcrth Varioprimer are used when preparing surfaces. The products must be checked to ensure that they have not expired before they are used. Apply the adhesive while guiding the gun vertically, starting from the centre at the bottom of the window. Do not position the vehicle on the lifting platform. Observe the information regarding bead geometry provided by the vehicle manufacturer. The application and drive-away times must be observed.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Application

Replacement glazing of cars, commercial vehicles, buses, vans and agricultural and construction machinery

Instructions

When applying the material, ensure that the working environment is clean. It is essential to use the product with the accompanying Wu00fcrth system components to ensure correct and faultless work. The work instructions provided with the product must be followed during application.

Technical information

Contents	400 ml
Container	Bag
Chemical basis	Moisture curing 1K polyurethane
Colour	Black
Density/conditions	1,2 g/cmu00b3 / at 20u00b0C
Drive-away time (with airbag)	2 h
Drive-away time (without airbag)	1 h
Drive-away time conditions	at 23u00b0C and 50% relative humidity
Max. open time /conditions	15 min / at 23u00b0C and 50% humidity
Min./max. processing temperature	5 to 35 u00b0C
Min./max. temperature resistance	-40 to 120 u00b0C
Tensile shear strength	4.5 MPa
Shelf life from production/conditions	12 Month / at 5u00b0C to 25u00b0C

Required accessory:

Art.-no.: 08900241

Glass cleaner Active cleaner

CLNR-WNDWADH-500ML

Special cleaner for pre-treatment in window repair

Art.-no.: 0890024010

Varioprimer safe + easy

PRIM-WNDWADH-(VARIOPRIM-S/E)-10ML

Multi-purpose surface pre-treatment agent for all common substrates found in replacement glazing

Art.-no.: 0890024021

Varioprimer safe + easy

PRIM-WNDWADH-(VARIOPRIM-S/E)-20ML

Multi-purpose surface pre-treatment agent for all common substrates found in replacement glazing

Art.-no.: 0890024101

Varioprimer safe + easy

PRIM-WNDWADH-(VARIOPRIM-S/E)-100ML

Multi-purpose surface pre-treatment agent for all common substrates found in replacement glazing

Art.-no.: 0891650

Primer brush

PRIMAPP-WNDWREP-FELT-BEIGE

For installing windscreens

Art.-no.: 08916510

Standard window application nozzle

APPJET-WNDWREP-POUCH-12PCS

For bag goods

Art.-no.: 0891023001

Window application nozzle

APPJET-WNDWREP-(V-CUTTING-15MM)-12PCS

For 300 ml + 310 ml metal cartridges (fine thread)

Art.-no.: 089165110

Adapters

EMPTYCART-POUCH-NOZZLEADAPTER

For bag goods

Additional accessory:

Art.-no.: 0891655

Windscreen lining tape

SEALTPE-WNDWREP-12M

For installing windscreens

Suitable glove:

Nitrile chemical protective glove

Permeation level: 2

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 3

Long, heavy-duty design

Latex and neoprene chemical protective glove

Permeation level: 1

Cotton flocking on the inside

Household glove

Permeation level: 1

Liquid-proof, premium-quality cleaning glove made from natural latex

Natural latex and neoprene chemical protective glove

Permeation level: 1

Cotton flocking on the inside

Butyl chemical protective glove

Permeation level: 2

Gas-tight and resistant to exhaust gases produced by combustion processes

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time	Permeation level
< 10 min	0
u2265 10 min	1
u2265 30 min	2
u2265 60 min	3
u2265 120 min	4
u2265 240 min	5
u2265 480 min	6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Տեղեկություններ ապրանքի վերաբերյալ