Intensive foam cleaner for the entire vehicle interior.

Micro-fine active foam (vacuum effect)

• Foam remains on the surface and actively draws out the dirt when the foam bubbles burst
• Outstanding dirt-dissolving power
• No need to saturate upholstery, meaning drying times are shorter

Gentle on materials

Suitable for all surfaces in the vehicle interior. The pre-determined breaking points of the airbag are not affected.

20x yield

• 500 ml Active Clean equates to the yield of approx. 10 litres of liquid cleaning product
• Cost-saving

Fast-separating in waste water in accordance with u00d6-Norm (Austrian standard) test B 5105

Biodegradability > 95%

Notice

Protect product from frost.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Spray Active Clean onto a clean, dry cloth and apply to the areas to be treated. Treat plastic parts with cockpit care afterwards. With fabrics and upholstery, let the foam take effect briefly and remove any soiling with a brush or sponge where necessary. With spots, work from the outside inwards. Then vacuum the upholstery.

Suitable glove:

Nitrile chemical protective glove

Permeation level: 5

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 6

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.