090401012 | Wurth.am

0x - +	Please log in to see the price	Add to cart

Specification

Galvanised steel. Individual attachment: Non-cracked concrete. Multiple attachment: Cracked and non-cracked concrete.

Small drill hole depth
High load-bearing capacities
Visual setting check and hand protection when installing with the marking/expander tool
Mechanical setting tool makes installation quicker and easier
Immediate load-bearing capacity u2013 no waiting
Attached part can easily be removed at any time
The attached part can be anchored with a fastening screw or a threaded rod
No installation torque required
The stop bit used with the attachable expander tool makes it quicker and easier to install. The matching drill holes make the installation even more secure.

Notice

Drive-in anchor W-ED/A4 see 13.2

Drive-in anchor W-ED, M12 (for core drills), and W-ED, DW15, see [13.3]

Application

Individual attachment: Standard concrete C20/25 to C50/60 (non-cracked concrete)

Multiple attachment: Anchorage of non-load-bearing systems (M6u2013M16, cracked and non-cracked concrete)

E.g. threaded rods, metal structures, metal profiles, grilles, cable conduits, pipes, mounting rails etc.

Can be used in concrete

May only be used in dry indoor room conditions

Technical information

Anchor diameter	12 mm
Anchor length (L H)	50 mm
Min./max. required screw-in depth	13-18 mm
Drill hole depth (h 0)	50 mm
Nominal drill-bit diameter (d 0)	15 mm
Min. centre-to-centre distance (s min)	120 mm
Min. edge clearance (c min)	165 mm
Minimum component thickness (h min)	130 mm
Through-hole in the component to be connected (d f)	14 mm
Torque during anchoring (T inst)	35 Nm