High-quality care product for tyre walls

Cleans, cares, protects

• Simple application in one action, thereby saving time
• Repeated wiping is not required
• Ideal before placing tyres into storage
• Dust and dirt-repellent
• Does not attach paintwork, plastics, rubber or metals

Silk-matt gloss

• New tyre look
• Visually enhances, making it particularly suitable for demonstration vehicles

Optimum UV and ozone protection

• Does not whiten tyres
• Prevents brittling and cracks caused by age

Care foam

• Economical to use
• Forms a stable foam on the tyre, which runs off after sinking down

AOX and solvent-free

Notice

Do not spray on tyre treads, brake discs and brake drums. Contains silicone.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

High-quality care product for tyre walls.

Instructions

Spray the foam evenly onto the tyre walls and leave it to dry. Re-wiping not required. Can also be used on wet tyres. Pre-clean briefly for heavy soiling.

Suitable glove:

Nitrile chemical protective glove

Permeation level: 5

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 6

Long, heavy-duty design

Disposable nitrile glove, extra strong

Permeation level: 1

Hard-wearing disposable gloves with excellent chemical protection

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.