High-modulus, non-conductive 1C window adhesive that can be used in any season

Can be used in any season

1-hour drive-away time with airbag at an ambient temperature of -10°C to +35°C

High-modulus

Vehicle-strengthening window adhesive

Antenna-compatible, non-conducting

Prevents contact corrosion

Suitable for use on aluminium, magnesium and hybrid vehicle bodies (e.g. Audi A8, Jaguar XJ etc.)

Safety-tested

• Drive-away time confirmed with crash test and Tu00dcV certificate in accordance with FMVSS208/212!
• Meets requirements of original equipment manufacturers (vehicle manufacturers)

Notice

It is imperative that the Würth active cleaner and Würth Varioprimer are used when preparing surfaces. The products must be checked to ensure that they have not expired before they are used. Apply the adhesive while guiding the gun vertically, starting from the centre at the bottom of the window. Do not position the vehicle on the lifting platform. Observe the information regarding bead geometry provided by the vehicle manufacturer. The application and drive-away times must be observed.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Replacement glazing of cars and small vans

Instructions

When applying the material, ensure that the working environment is clean. It is essential to use the product with the accompanying Würth system components to ensure correct and faultless work. The work instructions provided with the product must be followed during application.

Window adhesive Ultimate complete set including:

1x

Art.-no.: 0890023801

Window adhesive Ultimate

WNDWADH-ULTIMATE-CARTRIDGE-310ML

High-modulus, non-conductive 1C window adhesive that can be used in any season

1x

Art.-no.: 0890024021

Varioprimer safe + easy

PRIM-WNDWADH-(VARIOPRIM-S/E)-20ML

Multi-purpose surface pre-treatment agent for all common substrates found in replacement glazing

1x

Art.-no.: 0891651

Standard window application nozzle

APPJET-WNDWREP-CARTRIDGE-12PCS

For 300 ml + 310 ml metal cartridges (fine thread)

1x

Art.-no.: 0891650

Primer brush

PRIMAPP-WNDWREP-FELT-BEIGE

For installing windscreens

Additional accessory:

Art.-no.: 0899700408

Cleaning sponge, abrasive

CLNSPNG-ABRASIVE-L100MMXW20MMXH20MM

Abrasive cleaning sponge for thorough cleaning of stubborn dirt on glass panes and ceramic screen-printed edges