Oil binding granules Micro Absorber 089061

0x - +	Գինը գրանցվելուց հետո	Ավելացնել զամբյուղ

Specification

Highly effective, quick-acting oil binding granules for universal use (type III/R)

Highly absorbent, quick-acting

Less material is used, which means reduced disposal costs
1 kg oil binding granules bind approx. 0.9 litres oil (Westinghouse)
The fine granule capillary system encapsulates the absorbed material and does not release it

Universal use

Can be used for all liquids, meaning it is suitable even for acid, alkaline and water leaks
Can be used inside and outside

Extremely simple handling

Granules remain hard even after absorbing liquids
Little dust, does not silt up and is easy to sweep up
Optimum loose weight; granules remain at the application site

Non-slip

No risk of slipping on the granules when walking or driving on them
German road slip test figure of 0% is crucial with regard to the risk that should not be underestimated of slipping in a workshop or on road surfaces on which leaking oils can cause a dangerously smooth surface.

German road slip test

The North Rhine-Westphalia materials testing office accepts absorbers with a German road slip test figure of up to 20% in its testing system.

Oil binder type III/R

Oil binder for special requirements on solid surfaces and road surfaces; also suitable for trade and industry. This binder type must not be waterproof or be able to float.

Notice

Disposal takes place in accordance with the applicable specifications for the respective liquid either using a waste disposal site or an incinerator. Not suitable for hydrofluoric acid!

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Micro Absorber binds all types of liquid on any solid surface. Its fine grain penetrates small cracks and indentations. Optimum non-slip capacity is achieved even when the granules are completely saturated. Micro Absorber is highly suited for absorption tasks that require a great deal of contact with the surface and quick absorption, e.g. on road surfaces as well as workshop floors on which rapid absorption and cleaning are often crucial.

Instructions

Micro Absorber can be used as a preventative measure or in the event of damage and is easy to spread and pick up again. Liquids are absorbed effectively and encapsulated; the surface is left clean and dry.

Technical information

Chemical basis	Diatomaceous earth (moler)
Version	Granules/calcinated (baked)
Colour	Terracotta
pH value	5.5
Shelf life from production	24 Month
Density	2.3 g/cmu00b3
Density conditions	at 20u00b0C
Strau00dfen-Rutsch-Test (German road slip test)	0 %
Loose weight	495 kg/mu00b3
Oil absorber type	Oil absorber type III/R
Weight of content	10 kg
Contents	4.34 l

Suitable glove:

Neoprene chemical protective glove

Permeation level: 2

Heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time	Permeation level
< 10 min	0
u2265 10 min	1
u2265 30 min	2
u2265 60 min	3
u2265 120 min	4
u2265 240 min	5
u2265 480 min	6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Տեղեկություններ ապրանքի վերաբերյալ