For mounting car, truck and motorcycle tyres

Good sliding properties

• Requires less time and effort
• Low material consumption
• Low machine wear
• Gentle on tyres and rim flange
• Better centring of the tyre on the rim

Short flash-off time

• Powerful bonding between tyres and rim is established only a short time after assembly
• Reduces complaints and follow-on costs for any subsequent re-balancing

Suitable for run-flat tyres

Can be used for the latest tyre generations

Suitable for the tyre pressure monitoring system (TPMS)

Not harmful to health

Free from harmful solvents

Keeps the tyre bead soft and ready-to-use during summer/winter storage

Silicone-free

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

pH-neutral

No aggressive action on rubber or rim Skin-friendly and environmentally-friendly

Rubber and rim care

Keeps the rubber soft, thereby ensuring permanent sealing between the rim and tyre bead Prevents rust from forming (anti-corrosive) Prevents the tyre from sticking to the rim

Suitable for run-flat tyres

Can be used for the latest tyre generations

Instructions

Dismantling

• Force off the tyre using a suitable release mechanism
• Apply the tyre mounting paste to the rim flange and tyre bead with a paintbrush or sponge

Mounting

• Before the new tyres are fitted, the rim should be cleaned of old mounting adhesive around the rim flange sealing area. We recommend using our brake cleaner to do this. Remove any rust with a wire brush. Doing so will really bring the benefits of Würth tyre mounting paste to the fore.

• Then apply a thin coat to the tyre bead and rim flange and fit the tyres to the rim using the fitting machine and corresponding tools. Correct mounting of tyres is a pre-requisite for smooth running characteristics.