Synthetic paint sealant with wax portions and UV protection

Synthetic wax portions

• Smooths the finest texturing in the paint
• Glassy surface and brilliant deep shine
• Provides lasting protection against weather, car wash scratches and other environmental influences
• UV-resistant

Can be polished out without residues even on hot surfaces

Free of volatile silicones

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

For permanent high-gloss sealing of all types of paint

Instructions

• Thoroughly clean the paint
• Remove scratches and paint faults with a polish
• Apply a thin coat of pink paint sealant with a damp pressed sponge, allow it to dry slightly and wipe off with a microfibre cloth

Suitable glove:

Nitrile chemical protective glove

Permeation level: 5

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 6

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.