Cleaning foam for glass and smooth surfaces

Stable

No running off vertical surfaces

Extremely high degree of cleaning

• When the foam bubbles burst, highly concentrated, active cleaning agents are transported directly to the dirt
• Outstanding dirt dissolving power

Saves money thanks to 20x yield

Protects materials

Paints, rubber and plastics are not attacked.

Notice

Do not use on hot surfaces or in direct sunlight. Not suitable for polycarbonate glass.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Dissolves insect residue, bird droppings, road dust, nicotine deposits, greasy dirt, silicone residue and rubber marks from glass windows, car windows, mirrors and painted surfaces.

Instructions

For optimum foaming, shake the can well before use.

Art.-no.: 089187077

Canister coating ORSY protec

AY-ORSYPROTEC-FILSYS

REFILLOMAT

Art.-no.: 089180015

Filling system REFILLO

CACAN-REFILLO-EMPTY-WNDWCLNR-ACTIVE

REFILLO

The safe and economical system for manual refilling of spray cans with active substances and compressed air.

Suitable glove:

Nitrile chemical protective glove

Permeation level: 4

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 5

Long, heavy-duty design

Butyl chemical protective glove

Permeation level: 6

Gas-tight and resistant to exhaust gases produced by combustion processes

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.