Spacing assembly screw AMO® III 11.5 0234840132

Գլխավոր

Ամրացման տեխնոլոգիաներ

Շրջանակ ամրագրելու համակարգեր

Metal frame dowels

Spacing assembly screw, frame

Spacing assembly screw AMO® III 11.5

0234840132

Նմանատիպ ապրանքներ

AMO® III spacing assembly screw 7.5 A2 type 2 cylinder head 8.0 mm

Spacing assembly screw AMO® III 11.5

Spacing assembly screw AMO®-Y 11.5 mm

Amo® III spacing assembly screw 7.5 TYPE 2 cylinder head 7.5 mm

Amo® III spacing assembly screw 7.5 type 3 half round head

AMO® III spacing assembly screw 7.5 type 2 cylinder head 8.0 mm

AMO® III spacing assembly screw 7.5 TYPE 1 countersunk milling head

Spacing assembly screw AMO®-Combi 7.5/11.5

Amo® III spacing assembly screw 7.5 type cylinder head 7.5 mm

Spacing assembly screw AMO®-Y 7.5mm

Նմանատիպ ապրանքներ

Spacing assembly screw AMO® III 11.5

Արտիկուլ: 0234840132

Գինը գրանցումից հետո

Հարցերի դեպքում կարող եք զանգահարել՝ +374(0)10 349347, 349348

0x - +	Գինը գրանցվելուց հետո	Ավելացնել զամբյուղ

- +

Գինը գրանցվելուց հետո

Ավելացնել զամբյուղ

Կարդալ Ապրանքի նկարագրությունը

Տեղեկություններ ապրանքի վերաբերյալ

Կատալոգի էջը PDF ֆորմատով 1, 2

Տեխնիկական բնութագիր Կիրառումը Տեխնիկական ինֆորմացիա Պահանջվող լրասարք

Specification

For mounting windows in concrete and solid stone masonry. Pre-drilled mounting hole u00d8 10 mm, cylinder head u00d8 11.5 mm, with AW40 drive

Positive-locking, removable anchoring with no expansion pressure
Load-bearing function is retained, even under thermal load
Immediate load-bearing capacity u2013 no waiting after insertion
Tested fire resistance duration of 120 minutes
Tested burglary-resistant properties for plastic windows in resistance class WK 2 according to DIN V ENV 1627
Time saving, no anchor required
Short installation times, as no tools are required for insertion
AW drive for longer bit service life, improved power transmission and no ejection forces
Through-hole mounting
Positive locking for high load-bearing capacity
Removable
AW40 bit in every pack
Virtually no expansion forces on insertion

Notice

It is important to check that the components are correctly installed for the specific construction conditions (e.g. weight of window casement, surface properties, hole pattern in the brick).

Pre-drilling of window frame (10 mm). Drill perforated and hollow blocks with a rotary drill (without impact mechanism). No pre-drilling is necessary in aerated concrete; Amo III screw can be screwed in directly. Align window frames using alignment clamps or Amo Bag.

Screw length = frame width + gap + screw-in depth.

Application

Tension-free spaced mounting for all frame materials and all types of masonry
Installation of window and door frames with pre-drilled mounting hole 10 mm

Information for use

Guidelines for planning and executing the installation of windows and exterior doors, 2010 edition

Art. no. 5995 000 000:

The fixture must safely transfer all standard forces affecting the window to the structure and the foundation. The total load must therefore be calculated from e.g. the window load, wind load and working load (see DIN 1055). The currently applicable building regulations stipulate that buildings and their components must be planned in such a way that they do not endanger human life and health or pose a risk to public safety. Attachment of the windows must also comply with this criterion.

Window walls according to former DIN 18056 standard or elements with a surface greater than 9 mu00b2 and accident-proof glazing as specified in the German technical rules for safety glazing (TRAV) or DIN 18008-4

The DIN 18056 standard applied to window walls with a minimum surface area of 9 mu00b2 and a minimum side length of 2 m on the shortest side. Anchors with a general construction permit or European Technical Approval or with individual approval should be used for this application. Similarly, only anchors with a general construction permit or European Technical Approval or with individual approval must be used to attach accident-proof glazing as specified in the German technical rules for safety glazing (TRAV) or DIN 18008-4.

Other information

It is important to check that the components are correctly installed for the specific construction conditions (e.g. weight of window casement, surface properties, hole pattern in the brick). Accident-proof glazing as specified in the German technical rules for safety glazing (TRAV) or DIN 18008-4 may only be attached with the AMO Combi screw if appropriate individual approval has been obtained before installation starts.

Drill perforated and hollow blocks with a rotary drill (without impact mechanism)

Drill perforated and hollow blocks with a rotary drill (without impact mechanism)
Align window frames using alignment clamps or Amo^u00ae Bag
Screw length = frame width + gap + screw-in depth (see also 55.2 Amo^u00ae III 11.5 mm)