0890402 | Wurth.am

0x - +	Please log in to see the price	Add to cart

Specification

Lithium-soap, multi-purpose grease with EP additives for high loads

For long lubrication intervals
Resistant to high pressure due to EP additives
Good sealing action and resistant to water
Resistant to oxidation and corrosion
Heavy metal and chlorine-free
Silicone and resin-free
Comes in practical "pull-off" cartridge

Notice

Greases are supplied in plastic cartridges. The plastic cartridges improve storage (they prevent the grease from oozing out at high temperature). Store cartridges upright in a cool, dry place! The operating instructions of the vehicle, machinery and assembly manufacturers must be observed! For further information, see the technical information leaflet.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

For roller bearings and ball bearings exposed to heavy loads in industry and agriculture. Also for working and support rollers of all roller frames, hot and cold shear bearings, hinged blocks and spindles. Also specifically for cutting hammers and presses. Long-life grease is ideally suited for the following conditions: high surface pressures, irregular impact loads, in the wet and with dirt.

Instructions

Remove the head piece using the lever, then tension the slide pin and spring, and insert the cartridge. Screw on the header, disengage the sliding pin; the hand-lever gun is then ready to use.

Technical information

Chemical basis	Lithium 12 hydroxystearate
Soap base	Lithium 12 hydroxystearate
Lubricant code	KP2K-30
Colour	Light brown
Smell/fragrance	Characteristic
Density	1 g/cmu00b3
Density conditions	at 20u00b0C
Kinematic oil basis viscosity	280 mmu00b2/s
Conditions for viscosity of oil basis	at 40u00b0C
Min. dripping point	180 u00b0C
Dripping point conditions	in accordance with DIN ISO 2176
Min. temperature conditions	-30 u00b0C
Max. temperature conditions	130 u00b0C
Max. worked penetration	280
Worked penetration conditions	in accordance with DIN ISO 2137
NLGI grade	2
Conditions for NLGI grade	with DIN 51818
Corrosion protection period/category	Corrosion category 0
Corrosion protection period conditions	in accordance with DIN 51802, SKF Emcor test
VKA welding load	2600 N
Conditions for VKA welding load	in accordance with DIN 51350-4, VKA test (Institute for Internal Combustion Engines)
Resin-free	Yes
Silicone-free	Yes
AOX-free	Yes
Free from heavy metals	Yes
Chloric	No
Resistance against	Corrosion Oxidation
Contents	400 ml
Weight of content	0.4 kg
Shelf life from production	60 Month

Suitable glove:

Nitrile chemical protective glove

Permeation level: 6

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 6

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time	Permeation level
< 10 min	0
u2265 10 min	1
u2265 30 min	2
u2265 60 min	3
u2265 120 min	4
u2265 240 min	5
u2265 480 min	6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Product information