0892073 | Wurth.am

0x - +	Please log in to see the price	Add to cart

Specification

Bitumen-based coating compound containing solvents, cannot be painted over

Long-term protection and anti-humming effect
Resistant to spray and salt water, weak acids and bases
Quick drying
Doesn't run on vertical or upright surfaces
Excellent adhesion

Notice

Turn the can upside down and spray until the valve is empty after use. Do not spray on joints, engines, gears and brake systems.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

For repairing and protecting concealed areas that do not need to be painted. Ideal for preventing humming noises in external applications such as wheel housings, underbody seals, etc.

Instructions

Shake can well before use

Surface must be dry and free from rust, dirt, and grease

Optimum spray distance at 30 cm

For thicker layers, allow the product to dry between coats

Working pressure 3-6 bar

Technical information

Chemical basis	Bitumen
Surface pre-treatment required	Dry, dust and grease-free
Contents	500 ml
Weight of content	790 g
Smell/fragrance	Characteristic
Colour	Black
Min. proportion of solids	33 %
Conditions for thorough drying	At 20u00b0C, 400 u03bc wet
Min. spraying distance	20 cm
Conditions for skin-formation time	at 20u00b0C
Min. skin-formation time	75 min
Drying time	2.5 h
Conditions for drying time	at 20u00b0C
Density	1.09 g/cmu00b3
Ignition temperature	200 u00b0C
Flashing point	2 u00b0C
Density conditions	at 20u00b0C
Shelf life from production	24 Month
Max. temperature resistance	80 u00b0C
Min. temperature conditions	15 u00b0C
Min. temperature resistance	-25 u00b0C
Max. spraying distance	30 cm
Recoatable/Can be painted over	No

Required accessory:

Art.-no.: 08234406

Universal thinner

THINNER-UNI-6LTR

For all Wu00fcrth paint products

Art.-no.: 0891090

Spray can attachment Spraymaster

AY-SPRAYMASTER-PNTSPR

The practical attachment for your spray cans

Art.-no.: 0893222600

Silicone remover

SILREM-AEROSOLCAN-600ML

For professional cleaning and degreasing before applying adhesives or painting

Suitable glove:

Nitrile chemical protective glove

Permeation level: 3

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 4

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time	Permeation level
< 10 min	0
u2265 10 min	1
u2265 30 min	2
u2265 60 min	3
u2265 120 min	4
u2265 240 min	5
u2265 480 min	6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Product information