Only for business customers
Customer Log in
Register your account
Sign up to become an online customer and start using all the features of our online shop!
Products
Exclusively for business customers
Hotline +374 (0) 10 349347, 349348
Quick delivery
More than 125,000 products
Technical chemicals Surface protectors, coatings Underbody seal products Underbody seal
Underbody seal Special
Underbody seal Special
+374(0)10 349347, 349348
Tecnical Description
- Colour: Black
- Recoatable/Can be painted over: No
- Shelf life from production: 24 Month
- Density conditions: at 20°C
- Min. skin-formation time: 75 min
- Max. temperature resistance: 80 °C
- Contents: 500 ml
- Min. temperature conditions: -25 °C
- Min. temperature resistance: -25 °C
- Min. spraying distance: 30 cm
- Conditions for drying time: at 20°C and 65% relative humidity
- Min. proportion of solids: 33 %
- Chemical basis: Mix naphtha, solvent, propellant
- Surface pre-treatment required: Surface must be clean, dry and free from rust and grease.
- Weight of content: 406 g
- Conditions for thorough drying: at 20°C, 65% relative humidity
- Conditions for skin-formation time: 20°C, Ri 0 at 65% relative humidity, 100 µ wet layer thickness
- Drying time: 135 min
- Density: 0.79 kg/l
Chemical basis
Surface pre-treatment required
Contents
Weight of content
Code
Package / Quantity
Price (AMD)
Mix naphtha, solvent, propellant
Surface must be clean, dry and free from rust and grease.
500 ml
406 g
Code: 0892078550
Product information
Catalogue page as PDF 1
Tecnical Description
- Chemical basis Mix naphtha, solvent, propellant
- Surface pre-treatment required Surface must be clean, dry and free from rust and grease.
- Contents 500 ml
- Weight of content 406 g
- Colour Black
- Min. proportion of solids 33 %
- Conditions for thorough drying at 20°C, 65% relative humidity
- Min. spraying distance 30 cm
- Conditions for skin-formation time 20°C, Ri 0 at 65% relative humidity, 100 µ wet layer thickness
- Min. skin-formation time 75 min
- Drying time 135 min
- Conditions for drying time at 20°C and 65% relative humidity
- Density 0.79 kg/l
- Density conditions at 20°C
- Shelf life from production 24 Month
- Max. temperature resistance 80 °C
- Min. temperature conditions -25 °C
- Min. temperature resistance -25 °C
- Recoatable/Can be painted over No
- Excellent adhesion to wood
- Tested compatibility with commercially available wood impregnation compounds
- Excellent anti-drone effect
- No dripping off vertical surfaces
- Highly resistant to ageing
- Moisture exchange in wood is ensured by the breathable properties of the underbody seal.
- Penetration of moisture and other environmental influences is prevented
- Corrosion protection properties
- Resistant to spray
- Weather-resistant
- Abrasion-resistant
Store the product in a cool, dry place. Recommended storage temperature +10u00b0C to +30u00b0C. Protect from direct sunlight. Product can be removed again after application with thinner. Once dried, the product can be removed again only by mechanical means. Turn the can upside down and spray until the valve is empty after use.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Related products
LAST VIEWED
© 2020 All rights reserved.