Screw anchor W-SA TC Timber Connect 0901575100

0x - +	Գինը գրանցվելուց հետո	Ավելացնել զամբյուղ

Specification

For attaching wooden sills in cracked and non-cracked concrete

High transferable tensile and transverse loads

Invisible sill attachment:

Small screw head can be countersunk in wooden beam

Several mounting heights possible for each screw diameter (e.g. W-SA TC 12 x 160: tfi x = 80 mm to 300 mm)

Loads do not depend on thickness of attached part

Push-through installation

Quick and easy installation and disassembly

The sill anchor can be inserted using the ESS u00bd inch tangential impact screwdriver

Immediate load-bearing capacity u2014 no waiting

Virtually no expansion effect, enabling minimal edge and axial clearance to be maintained

Anchoring via positive locking

The saw-tooth threads cut into the concrete when the sill anchor is screwed into the pre-drilled hole.

Application

Fastening wooden sills in cracked and non-cracked concrete

The sill anchor has general technical approval for use in reinforced or non-reinforced standard concrete with a strength class of min. C20/25 and max. C50/60 in accordance with EN 206-1:2001-07

Anchorage with general technical approval in cracked concrete (tension zone) and non-cracked concrete (compression zone)

The sill anchor may only be used for components in enclosed areas, e.g. homes, offices, schools, hospitals, retail outlets

The sill anchor can be used to connect the following types of wood:

Solid wood made of coniferous wood assigned at least grade S10 in accordance with DIN 4074-1
Laminated timber in accordance with DIN 1052
Laminated beams assigned at least grade S10 in accordance with general technical approval

Technical information

Anchor diameter	7.5 mm
Anchor length (l)	100 mm
Nominal drill-bit diameter (d 0)	6 mm
Drill hole depth (h 1)	65 mm
Min. height of the fixture (t fix)	40 mm
Max. attachment height (t fix)	150 mm
Embedding depth (h nom)	55 mm
Min. centre-to-centre distance (s min)	40 mm
Min. edge clearance (c min)	40 mm
Minimum component thickness (h min)	100 mm

Required accessory:

Art.-no.: 07023170

Electric tangential impact screwdriver ESS 1/2

IMPSCRDR-EL-ESS1/2IN

MASTER

Powerful, lightweight electric impact screwdriver for M 6 to M 18 screws. Central handle and favourable position of centre of gravity ensures effortless single-handed operation.

Art.-no.: 0901575001

Setting tool

TL-DWL-(W-SA TC)-7,5

Տեղեկություններ ապրանքի վերաբերյալ