Two-in-one vehicle cleaner: washing and waxing in a single step

High cleaning performance

Removes dirt of all kinds from vehicle paintwork, chrome, plastics, rubber etc.

Forms a protective layer

• Water simply drips off
• Makes it easier to wipe dry with a chamois

Fast separation in accordance with the u00d6-Norm (Austrian standard) test B 5105

Oily/greasy dirt is not emulsified, but is penetrated and separated. The resulting wastewater can therefore be separated via the light-oil separator.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Add 25 ml AutoshamTWO to approx. 10 litres of warm water. Shampoo the vehicle with a sponge and then rinse off with clean water. To achieve an optimal result, then wipe vehicle dry with a chamois. Can also be used with high-pressure cleaners (conc. 0.05–0.1%).

Suitable glove:

Neoprene chemical protective glove

Permeation level: 2

Heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.