• Engine flush and cleaner cleans the inside of the engine and the oil-supplying system

Engines cleaned of dirt can now operate at their full performance level together with the clean oil.

• Gentle, fast cleaning
• Does not attack seals
• Optimises exhaust emission
• Compatible with catalytic converters
• Loosens jammed piston rings
• Easy to use
• A 400 ml can is sufficient for an oil fill quantity of up to 5 litres. 1000 ml is sufficient for 10 - 15 litres of oil

Notice

Not suitable for use in motorcycles with oil bath clutch that share a joint oil circuit

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

• Suitable for all mineral and synthetic-based engine oils
• Suitable for all petrol and diesel engines

Instructions

Add the engine flush and cleaner to the oil when the engine is at operating temperature. Let the engine idle for approximately 10 minutes. Then change the oil and the filter.