089305540 | Wurth.am

0x - +	Please log in to see the price	Add to cart

Specification

Versatile multi-functional spray for a range of applications

Lubricates, cleans and maintains

Lubricates locks, hinges, bushings, chains, door locks
Stops creaking and squeaking and restores sliding properties of seized and jammed parts
Cleans and maintains plastic and metal parts such as e.g. panelling and housing

Removes rust and protects against corrosion

Loosens rusted bolts, pipe fittings, screws, nuts, joints, Bowden cables, shafts, locks etc.
Infiltrates and displaces moisture around electronics and electrics
Prevents corrosion on metals and electrical components, cable connections, relays, plugs, couplings etc.
Prevents freezing up of lock cylinders and closures

Resin, acid and silicone-free

Does not attack rubber, paint or plastics

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Rust dissolver

Outstanding creeping properties ensure rapid penetration of rust and corrosion

Lubricant

Excellent lubricating properties. Eliminates creaking and squeaking noises. Reduces friction and wear

Cleaner

Good cleaning performance guaranteed by infiltration of dirt, grease and oil residues

Corrosion protection

Optimal adhesion properties on metals. A thin viscous protective film prevents moisture even over micro surface irregularities and thus effectively protects against rust and corrosion

Contact spray

Water and moisture-displacing properties and outstanding creeping properties enhance electrical conductivity and eliminate leakage current

Instructions

Shake the can before use, spray the parts and let it take effect briefly. After use, spray the can upside down until it is empty.

Technical information

Contents	0.4 l
Chemical basis	Mineral oil
Lubricant system	Oil
Colour	Light yellow transparent
Min./max. processing temperature for can	-10 to 40 u00b0C
Min./max. temperature conditions	-30 to 130 u00b0C
Shelf life from production	24 Month
Min. processing temperature for can	-10 u00b0C
Type of spray head	Standard spray head
Max. processing temperature for can	40 u00b0C
Min. temperature conditions	-30 u00b0C
Max. temperature conditions	130 u00b0C
Min. flashing point	-80 u00b0C
Silicone-free	Yes
Acid-free	Yes
Resin-free	Yes
AOX-free	Yes
White oil-free/mineral oil-free	No
VOC concentration (CH)	76.57 g/l
Kinematic oil basis viscosity	30 cSt
Material compatibility	Steel Non-ferrous metals Stainless steel Epoxy glass fabric EPDM FKM PE PP Vinyl PTFE PL PA NBR
Conditions for viscosity of oil basis	at 40u00b0C
Container	Aerosol can
Weight of content	255 g
Conditions to maintain shelf life from production	at 20u00b0C

Suitable glove:

Nitrile chemical protective glove

Permeation level: 6

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 6

Long, heavy-duty design

Disposable nitrile glove, extra strong

Permeation level: 1

Hard-wearing disposable gloves with excellent chemical protection

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time	Permeation level
< 10 min	0
u2265 10 min	1
u2265 30 min	2
u2265 60 min	3
u2265 120 min	4
u2265 240 min	5
u2265 480 min	6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Product information