Colourless special lubricant with creeping properties for the food industry as well as for the beverage, pharmaceutical and clinical industries

Low-viscosity and colourless special lubricant with penetration properties

• Outstanding lubrication properties in hard-to-reach places thanks to low viscosity
• Excellent penetration and cleaning effect guarantees optimum protection on machinery and conveyors subjected to the influence of water
• Economical
• No visible damage if the lubricant occasionally comes into contact with the product

Odourless and tasteless

Good material compatibility

Broad application range on a variety of surfaces such as aluminium, stainless steel, plastics compatible with mineral oil, e.g. PP, PE, PS, nylon, polycarbonate glass, epoxy glass fabric-base plastics, sealing rings.

Displaces water

Optimum corrosion protection properties

Resin-free and acid-free

Age-resistant

Silicone-free and AOX-free

Occasional contact with food is acceptable

Highly compatible with skin and mucous membranes

Non-toxic

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

For liquid lubrication of valve gaskets, sleeves, O-rings, drives, piston rods and guides on slide dampers, hinge band and roller chains as well as mechanisms in the food and beverage industry. For lubricating cutting blades in the paper industry as well as needles and hooks on knitting machines. Versatile use in manufacturing, application and packaging of foodstuffs as well as of pharmaceutical and cosmetic products. Lubricating effect is even maintained for machines and conveyors exposed to water. Ideal for use as release agent in the food and beverage industries.

Instructions

Clean and degrease the parts to be lubricated. Then spray a thin coat.

Suitable glove:

Nitrile chemical protective glove

Permeation level: 6

Cotton velour lining

Nitrile chemical protective glove, heavy-duty

Permeation level: 6

Long, heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.